Qingyuan Puhe Meiye New Materials Technology Co. Ltd..
Years of manufacturing experience, focus on refined quality.
-
Free consultation hotline
13500012815
-
Application Range of Glass Fiber Bar in Dongguan
The main applications of fiberglass rods are: widely used in tents, bags, golf nets, gun racks, beach chairs, kites, windmills, flying saucers, aerial models, [View Details]
Source： Post Date：2019-02-28 -
Application and Development of Continuous Carbon Fiber Bar Reinforced Polyether Ether Ketone Composi...
Polyether ether ketone (PEEK) and carbon fiber rod have excellent properties, and there is a good interface between PEEK and carbon fiber rod. Carbon fiber rod can also act as heterogeneous nucleating.. [View Details]
Source： Post Date：2019-02-28 -
Continuous Carbon Fiber Pipe Reinforced Thermoplastic Prepreg will be mass produced
Domestic continuous carbon fiber reinforced thermoplastic preprepreg industry started late, so far, the market is still dominated by continuous glass fiber reinforced PP, PA and other general plastic .. [View Details]
Source： Post Date：2019-05-21 -
Composition and Structure of Carbon Fiber Bars
The spacing between the layers of the carbon fiber rod is about 3.39 to 3.42A. The carbon atoms between the parallel layers are not arranged as neatly as graphite, and the layers are connected by Van .. [View Details]
Source： Post Date：2019-05-20 -
What factors select the glossiness of FRP grids?
The principle of FRP grille about aggregate: high surface activity, such as silica, impregnated with a layer of silane solvents, can improve bonding strength, aluminum powder and asbestos powder are s.. [View Details]
Source： Post Date：2019-05-20 -
FRP grids can also be used in corrosive environments
FRP grille has an irreplaceable superior function in the field of anti-corrosion. In the process of selection, the material of m-benzene, o-benzene, ethylene and other substrates can be reasonably sel.. [View Details]
Source： Post Date：2019-05-20 -
What is the percentage of resin used for FRP grids?
The overlap of FRP grille is longitudinal, the width of overlap is not less than 20 mm, and the width of transverse overlap is not less than 15 mm. [View Details]
Source： Post Date：2019-05-20
Contact: Mr. Lin Phone：13500012815 e-mail：704887130@qq.com
Copyright © 2019 Qingyuan Puhe Meiye New Materials Technology Co. Ltd..
Guangdong ICP prepared 2024332420 Technical Support: Pin Shang Network Web Map
*The relevant website material and related resources are all from the Internet. If there is any infringement, we will delete it within 24 hours.*